TRIO-PS-IP67/3AC/24DC/20 – 1039829 Trio 3pha, 20A IP 67
Mã sản phẩm: TRIO-PS-IP67/3AC/24DC/20 - 1039829
Nhà sản xuất: PHOENIX CONTACT
Mô tả:
TRIO-PS-IP67/3AC/24DC/20 - 1039829 là dòng nguồn TRIO 3pha đạt độ kín khít IP67 đầu tiên của Phoenix Contact. TRIO-PS-IP67/3AC/24DC/20 - 1039829 có đầu vào 3AC, đầu ra 24VDC , In = 20A , vỏ bằng kim loại mạ cao cấp . TRIO-PS-IP67/3AC/24DC/20 - 1039829 đặc biệt hiểu quả trong việc cung cấp nguồn 24VDC khu vực bên ngoài phòng điều khiển mà không phải lắp thêm tủ bảng điện mới .
Giá bán lẻ: Vui lòng liên hệ
Thông tin kỹ thuật:
Your advantages
- Direct installation at the load in the field reduces cable lengths and saves space in the control cabinet
- The robust design (die-cast aluminum housing) ensures high system availability, thanks to resistance to extreme environmental conditions (temperature, dust, and water)
- Reliable startup of high loads, thanks to the dynamic boost
- High efficiency of > 93%, thanks to low power losses
Ambient conditions
| Degree of protection | IP67 |
|---|---|
| Ambient temperature (operation) | -25 °C ... 85 °C (Derating > 60 °C (3 AC): 2,5 %/K / > 50 °C (2 AC): 2,5 %/K) |
| Ambient temperature (start-up type tested) | -40 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
| Climatic class | 3K3 (in acc. with EN 60721) |
| Degree of pollution | 4 |
| Installation height | ≤ 4000 m (> 2000 m, Derating: 10 %/1000 m) |
Input data
| Nominal input voltage range | 3x 400 V AC ... 500 V AC |
|---|---|
| 2x 400 V AC ... 500 V AC | |
| Input voltage range | 3x 400 V AC ... 500 V AC -20 % ....+15 % |
| 2x 400 V AC ... 500 V AC -10 % ... +15 % | |
| AC frequency range | 50 Hz ... 60 Hz |
| Discharge current to PE | < 3.5 mA |
| Current consumption | 3x 1.2 A (400 V AC) |
| 3x 1 A (500 V AC) | |
| 2x 2.3 A (400 V AC) | |
| 2x 1.9 A (500 V AC) | |
| Nominal power consumption | 39 W |
| Inrush current | typ. 22 A (at 25 °C) |
| Mains buffering time | typ. 10 ms (400 V AC) |
| typ. 20 ms (500 V AC) | |
| Input fuse | 3.15 A (internal (device protection), slow-blow) |
| Recommended breaker for input protection | 6 A ... 16 A (Characteristics B, C, D, K) |
| Type of protection | Transient surge protection |
| Protective circuit/component | Varistor |
Output data
| Nominal output voltage | 24 V DC ±1 % |
|---|---|
| Nominal output current (IN) | 20 A |
| Dynamic Boost (IDyn.Boost) | 30 A (5 s) |
| Derating | > 60 °C ... 70 °C (2.5%/K) |
| Protection against overvoltage at the output (OVP) | ≤ 30 V DC |
| Control deviation | < 1 % (change in load, static 10 % ... 90 %) |
| < 3 % (Dynamic load change 10 % ... 90 %, 10 Hz) | |
| < 0.1 % (change in input voltage ±10 %) | |
| Residual ripple | ≤ 20 mVPP |
| Output power | 480 W |
| Typical response time | < 1 s |
| Maximum power dissipation in no-load condition | < 2 W (400 V AC) |
| < 2.5 W (480 V AC) | |
| Power loss nominal load max. | < 44 W (400 V AC) |
| < 44 W (480 V AC) |