IL MOD BK DI8 DO4-PAC – 2878696 Modbus RTU IOs
Mã sản phẩm: IL MOD BK DI8 DO4-PAC - 2878696
Nhà sản xuất: PHOENIX CONTACT
Mô tả:
IL MOD BK DI8 DO4-PAC - 2878696 Modbus RTU IOs của Phoenix Contact tích hợp sẵn 8Di và 4DO trên bo mạch có khả năng mở rộng tới 4096 Ios ( Digital và Analog ). IL MOD BK DI8 DO4-PAC - 2878696 kích thước nhỏ gọn dùng giắc cắm kiểu lò xo thích hợp với nhiều ứng dụng và là sản phấm IOs được sử dụng rộng rãi trên khắp thế giới cũng như ở Việt Nam
Giá bán lẻ: Vui lòng liên hệ
Thông tin kỹ thuật:
Ambient conditions
| Ambient temperature (operation) | -25 °C ... 60 °C |
|---|---|
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Degree of protection | IP20 |
General
| Mounting type | DIN rail |
|---|---|
| Net weight | 327.6 g |
| Note on weight specifications | with connectors |
| Diagnostics messages | Short-circuit / overload of the digital outputs Yes |
| Sensor supply failure Yes | |
| Failure of the actuator supply Yes |
Interfaces
| Designation | Modbus/RTU |
|---|---|
| No. of channels | 1 |
| Connection method | D-SUB-9 female connector |
| Note on the connection method | Electrically isolated supply, shielding directly connected to functional earth ground |
| Transmission speed | 1.2 kBit/s ... 115.2 kBit/s (can be parameterized) |
| Number of positions | 9 |
| Designation | Inline local bus |
| Connection method | Inline data jumper |
| Transmission speed | 500 kbps / 2 Mbps (automatic detection, no combined system) |
System limits of the bus coupler
| Designation | System limits of the bus coupler |
|---|---|
| Number of supported devices | max. 63 (per station) |
| Number of local bus devices that can be connected | max. 61 (on board I/Os are two devices) |
| Number of devices with parameter channel | max. 8 |
| Number of supported branch terminals with remote bus branch | 0 |
Inline potentials
| Designation | Bus coupler supply UBC; Communications power UL (7.5 V) and the analog supply UANA (24 V) are generated from the bus coupler supply. |
|---|---|
| Supply voltage | 24 V DC (via Inline connector) |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current consumption | min. 80 mA (without connected I/O terminal blocks) |
| max. 0.98 A | |
| Designation | Communications power (UL) |
| Supply voltage | 7.5 V DC |
| Power supply unit | max. 0.8 A DC |
| Designation | Supply of analog modules (UANA) |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Power supply unit | max. 0.5 A DC |
| Designation | Main circuit supply (UM) |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Power supply unit | max. 8 A DC (sum of UM + US) |
| Current consumption | max. 8 A DC |
| Designation | Segment circuit supply (US) |
| Supply voltage | 24 V DC (via Inline connector) |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Power supply unit | max. 8 A DC (sum of UM + US) |
| Current consumption | max. 8 A DC |
| Power consumption | typ. 1.7 W (entire device) |
| Current consumption | min. 6 mA (without connected peripherals) |
Digital inputs
| Input name | Digital inputs |
|---|---|
| Description of the input | EN 61131-2 type 1 |
| Connection method | Inline connector |
| Connection technology | 3-wire |
| Number of inputs | 8 |
| Typical response time | approx. 500 µs |
| Type of protection | Reverse polarity protection |
| Input voltage | 24 V DC |
| Input voltage range "0" signal | -30 V DC ... 5 V DC |
| Input voltage range "1" signal | 15 V DC ... 30 V DC |
| Nominal input current at UIN | typ. 3 mA |
| Typical input current per channel | typ. 3 mA |
| Delay at signal change from 0 to 1 | 1.2 ms |
| Delay at signal change from 1 to 0 | 1.2 ms |
Digital outputs
| Output name | Digital outputs |
|---|---|
| Connection method | Inline connector |
| Connection technology | 3-wire |
| Number of outputs | 4 |
| Type of protection | Short-circuit and overload protection |
| Output voltage | 24 V DC -1 V (At nominal current) |
| Nominal output voltage | 24 V DC |
| Maximum output current per channel | 500 mA |
| Maximum output current per module / terminal block | 2 A |
| Maximum output current per module | 2 A |
| Nominal load, inductive | 12 VA (1.2 H, 48 Ω) |
| Nominal load, lamp | 12 W |
| Nominal load, ohmic | 12 W |