Danh mục sản phẩm




Thương hiệu

TRIO-PS-IP67/1AC/24DC/20 – 1039830 Trio 1pha 20A IP 67


Mã sản phẩm: TRIO-PS-IP67/1AC/24DC/20 - 1039830

Nhà sản xuất: PHOENIX CONTACT

Mô tả:

TRIO-PS-IP67/1AC/24DC/20 - 1039830  là dòng nguồn TRIO đạt độ kín khít  IP67 đầu tiên của Phoenix Contact. TRIO-PS-IP67/1AC/24DC/20 - 1039830 có  đầu vào 1AC, đầu ra 24VDC , In = 20A , vỏ bằng kim loại mạ cao cấp . TRIO-PS-IP67/1AC/24DC/20 - 1039830 đặc biệt hiểu quả trong việc cung cấp nguồn 24VDC khu vực bên ngoài phòng điều khiển mà không phải lắp thêm tủ bảng điện mới .

Giá bán lẻ: Vui lòng liên hệ

Thông tin kỹ thuật:

Your advantages

  • Direct installation at the load in the field reduces cable lengths and saves space in the control cabinet
  • The robust design (die-cast aluminum housing) ensures high system availability, thanks to resistance to extreme environmental conditions (temperature, dust, and water)
  • Reliable startup of high loads, thanks to the dynamic boost
  • High efficiency of > 93%, thanks to low power losses

Dimensions

Width 151 mm
Height 304 mm
Depth 120 mm
Back to top
 

Ambient conditions

Degree of protection IP67
Ambient temperature (operation) -25 °C ... 85 °C (Derating >60°C: 2.5 %/K)
Ambient temperature (start-up type tested) -40 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
Climatic class 3K3 (in acc. with EN 60721)
Degree of pollution 4
Installation height ≤ 4000 m (> 2000 m, Derating: 10 %/1000 m)
Back to top
 

Input data

Nominal input voltage range 100 V AC ... 240 V AC
110 V DC ... 250 V DC
Input voltage range 100 V AC ... 240 V AC 10 %
110 V DC ... 250 V DC 10 %
Dielectric strength maximum ≤ 300 V AC 15 s
AC frequency range 50 Hz ... 60 Hz
Discharge current to PE < 3.5 mA
Current consumption 5.6 A (100 V AC)
2.4 A (240 V AC)
Nominal power consumption 36.8 W
Inrush current typ. 20 A (at 25 °C)
Mains buffering time typ. 10 ms (120 V AC)
typ. 15 ms (230 V AC)
Input fuse 10 A (internal (device protection))
Recommended breaker for input protection 10 A ... 16 A (Characteristics B, C, D, K)
Type of protection Transient surge protection
Protective circuit/component Varistor
Back to top
 

Output data

Nominal output voltage 24 V DC ±1 %
Nominal output current (IN) 20 A
Dynamic Boost (IDyn.Boost) 30 A (5 s)
Derating > 60 °C ... 70 °C (2.5%/K)
Protection against overvoltage at the output (OVP) ≤ 30 V DC
Control deviation < 1 % (change in load, static 10 % ... 90 %)
< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz)
< 0.1 % (change in input voltage ±10 %)
Residual ripple ≤ 30 mVPP
Output power 480 W
Typical response time < 1 s
Maximum power dissipation in no-load condition < 3 W (120 V AC)
< 2.5 W (230 V AC)
Power loss nominal load max. < 48 W (120 V AC)
< 36 W (230 V AC)